7. Configuring transmitter using web
interface
7.1 Configuring web interface home view
You can select how many measurement parameters (1 … 6) you want to see in the
Measurements view of the web interface.
Both Guest and Administrator users can configure the Measurements view.
1. Connect to the web interface.
2. Log in to the web interface.
The web interface opens in the Measurements view.
3. In the dropdown lists, select the desired probe and measurement parameter
combinations.
You can freely select the probe and parameter combinations for the 6 possible locations.
The selected measurement parameters will also be displayed in the graph below the
locations, each with a color of their own.
Indigo510, Indigo520 User Guide M212287EN-N
84
To Next Page
Loading...
