Vaisala Indigo500 Series - Resetting PIN Code in Web Interface

• A pointed object for pressing the button inside the transmitter.
1. When you are ready with the start up and have done the necessary configurations, press
the PRESS TO ACTIVATE WEB INTERFACE button again to disable the use of
configuration mode IP.
ANALOG OUTPUTS
RELAY 1RELAY 2
+
+
+
+
+
+
+
+
+
CH1
CH2
CH3
CH4
RS-485
PROBE
24 VOUT
ANALOG
INPUT
NO COM NC NO COM NC
1
2
SERVICE PORT
PRESS TO ACTIVATE
WEB INTERFACE
ETHERNET
VS
+
The LED next to the button shuts down. The Ethernet cable can be disconnected.
5.2.10 Resetting PIN code in web interface
You need Administrator user rights for this task.
If you forgot your screen lock PIN code, you can reset it in the web interface.
Chapter 5 – Start-up
71