Vaisala Indigo500 Series - DIN Rail Mounting

3.2.3 DIN rail mounting
• Allen keys (4 mm and 5 mm),
provided
• Screws 14 mm (2 pcs), provided
• Washers (2 pcs), provided
• DIN rail clip fasteners (2 pcs),
provided
Figure 11 Attaching DIN rail clip fasteners
1. Open the 2 hex screws on the cover of the transmitter using a 4-mm Allen key.
2. Open the transmitter cover.
3. Attach the DIN rail clip fasteners on the back of the transmitter using 2 × 14-mm screws
and a 5-mm Allen key. Place nylon washers under the screws to protect the surface of the
transmitter.
4. Mount the transmitter on the DIN rail.
Indigo510, Indigo520 User Guide M212287EN-N
32