Vaisala Indigo500 Series - Configuring Relays in Web Interface; Figure 39 Relays Configuration Menu in Web Interface

1. Connect to the web interface.
2. Log in to the web interface as an administrator user.
3. Select Inputs and outputs > Analog input.
4. In Analog input o/on, set analog input on.
5. To power your analog input device through Indigo520, in Analog input powering, set
analog input powering on.
7.4 Configuring relays in web interface
You need Administrator user rights for this task.
Figure 39 Relays configuration menu in web interface
1. Connect to the web interface.
Chapter 7 – Configuring transmitter using web interface
89