More information
‣
Configuring analog outputs in web interface (page 85)
7.3 Configuring analog input in web interface
You need Administrator user rights for this task.
Analog input is not available in Indigo510 transmitters or transmitters that are
powered with Power over Ethernet (PoE).
Only 1 measurement probe can be connected to the transmitter when you power
the analog input device through Indigo520 probe 2 connection terminal. The
measurement probe has to be connected to probe 1 connection terminal.
The Indigo520 transmitter has 1 analog current (mA) input.
Before you start, make sure that the probes you want to use are connected to the transmitter.
Figure 38 Analog input configuration menu in web interface
Indigo510, Indigo520 User Guide M212287EN-N
88
To Next Page
Loading...
