Vaisala Indigo500 Series - Enabling Modbus TCP;IP on Touchscreen; Disabling Temperature Compensation on Touchscreen

6.6 Enabling Modbus TCP/IP on touchscreen
1. Select Menu > Transmitter > Network.
2. Make sure that Network o/on is set on, and that the network settings are set correctly.
3. Select Menu > Inputs and outputs > Modbus TCP/IP.
4. In Modbus o/on, set Modbus on.
More information
‣
Modbus overview (page 94)
6.7 Disabling temperature compensation on
touchscreen
1. Select the
configuration menu symbol at the upper right corner of the touchscreen.
2. Select Transmitter > Compensation.
3. In Temperature compensation o/on, set compensation o.
More information
‣
Temperature compensation (page 46)
Chapter 6 – Configuring transmitter using touchscreen display
83