Vaisala Indigo500 Series - Figure 9 Wall Mounting with Adapter Plate; Figure 10 Adapter Plate Dimensions

Figure 9 Wall mounting with adapter plate
mm
[in]
96 [3.8]
169 [6.7]
183 [7.2]
Ø 7
[0.28]
115 [4.5]
Figure 10 Adapter plate dimensions
1. Attach the adapter plate to the mounting holes using 4 screws and 4 wall plugs.
2. Open the 2 hex screws on the cover of the transmitter using a 4-mm Allen key.
3. Open the transmitter cover.
4. Attach the transmitter to the adapter plate using 2 × 14-mm screws and a 5-mm Allen key.
Place nylon washers under the screws to protect the surface of the transmitter.
Chapter 3 – Installation
31