3. In Transmitter > Software, select Browse, and browse to the software update file.
4. Select Update.
Updating takes some minutes.
The transmitter restarts. After the restart, you will be prompted to log in again. You can see the
updated software version under Software System status.
If the transmitter's IP address is assigned via DHCP, the transmitter may get a new
IP address upon restarting. To continue using the web interface, reconnect using
the transmitter's new IP address.
More information
‣
Connecting to web interface (page 61)
‣
Logging in to web interface (page 65)
Indigo510, Indigo520 User Guide M212287EN-N
98
To Next Page
Loading...
