Installation Manual _________________________________________________________________
102 _________________________________________________________________ M210485EN-B
0306-047
Figure 87 Connecting the Data Cable
3. Connect the provided grounding cable to the earth screw on the
bottom of SA20M and secure with the finger screw, refer to
Figure 88 below. The other end of the grounding cable is
attached to the same grounding point as other equipment.
4. Attach the cables to the sensor arm and to the mast with the
cable ties.
0306-048
Figure 88 Connecting the Grounding Cable
5. Face the arrow (→ N) on the sensor plate to the magnetic north
with the help of the compass.
To Next Page
Loading...
