Chapter 4 _________________________ Installation of the Weather Station Components to the Mast
VAISALA _______________________________________________________________________ 87
CHAPTER 4
INSTALLATION OF THE WEATHER
STATION COMPONENTS TO THE MAST
This chapter provides detailed information on installing the weather
station logger and all the sensors to the mast.
Preparing Installation
Tools for assisting the installation of the weather station components
are provided. The following tools are supplied with the delivery:
- 3 mm, 4 mm, 5 mm, and 6 mm Allen keys
- Cable ties
- Cable shrouds for protecting the cables
One person can complete the whole installation after the mast is
installed and it can be tilted and erected with the winch.
Unpacking Instructions
When you have received the delivery, check that the sensors have not
been damaged during transportation.
NOTE
Store all the sensors and other devices in their shipping boxes until
you install them to the mast.
To Next Page
Loading...
