Vaisala MAWS201MP TACMET - Assembling the Mast Tubes; Figure 51 Guy Wire Attachment; Figure 52 Alignment of the Mast Tubes

Installation Manual _________________________________________________________________
66 __________________________________________________________________ M210485EN-B
0303-035
Figure 51 Guy Wire Attachment
Assembling the Mast Tubes
The upper mast tube(s) has the O-ring (number 1 in Figure 52 below)
installed on the tube.
For connecting the mast tubes, use lubricant to make the O-ring
slippery and simply slide the mast tubes together. You need to rotate
either of the tubes to align the groove (2) on the upper tube and the
ridge (3) inside the lower mast tube, see Figure 52 below.
0303-036
Figure 52 Alignment of the Mast Tubes