Vaisala MAWS201MP TACMET - Figure 103 Model Information Window; Figure 104 Radio Modem Settings

Chapter 4 _________________________ Installation of the Weather Station Components to the Mast
VAISALA ______________________________________________________________________ 117
7. In the Configure menu, select Load.
8. Follow the instructions on the screen to select the appropriate
COM port (usually COM1) and to connect the power supply
when asked to.
9. When the Model information window appears, click the OK
button to proceed.
0306-060
Figure 103 Model Information Window
10. To set the radio modem configuration, select Configure -
Settings. For the correct settings, refer to Table 6 on page 118
and Figure 104 below. Finally, to approve the settings, click the
OK button.
0306-061
Figure 104 Radio Modem Settings