Vaisala MAWS201MP TACMET - Connecting the Lowest Mast Tube to the Pedestal Tube; Figure 47 Axle for Hinge; Figure 48 Hinge Axle Installation

Chapter 3 ______________________________________________________ Installation of the Mast
VAISALA _______________________________________________________________________ 63
Connecting the Lowest Mast Tube
to the Pedestal Tube
To connect the lowest mast tube to the pedestal tube, install the axle
for the hinge. For installing the axle, follow the procedure below:
1. Take the axle (number 1 in Figure 47 below) for the hinge from
the plastic bag labeled Hinge Set.
0303-031
Figure 47 Axle for Hinge
2. Thread the Allen bolt (4) with the washers (2 and 3) to either
end of the axle.
3. Lift the mast end (3) on the hinge (1) and install the axle (2), see
Figure 48 below.
0303-032
Figure 48 Hinge Axle Installation