EasyManua.ls Logo

Vaisala MAWS201MP TACMET - Figure 18 Passive Lightning Rod and the Holders; Figure 19 Winch; Lightning Rod; Winch

Vaisala MAWS201MP TACMET
153 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 2 __________________________________________________________ Product Overview
VAISALA _______________________________________________________________________ 31
Lightning Rod
The mast is delivered with a passive lightning rod made from copper.
The lightning rod holders are made of non-conductive material to
protect the mast devices from overvoltage when lightning occurs.
Refer to Figure 18 below. An active type of lightning rod is available
as an option for areas where heavy lightning activity occurs
frequently.
Figure 18 Passive Lightning Rod and the Holders
Winch
The winch is easily installed to the pedestal tube. After erecting the
mast, the winch should be removed from the pedestal tube and stored
in a dry and warm place.
Figure 19 Winch

Table of Contents

Related product manuals