Installation Manual _________________________________________________________________
110 _________________________________________________________________ M210485EN-B
Securing and Protecting the Cables
After you have connected the cables from the sensors to the
QMP202MP unit, secure all the cables to the mast with cable ties,
refer to Figure 96 below.
0306-055
Figure 96 Securing Cables to the Mast
Near the hinge you should protect the cables with the provided spiral
to avoid possible damages to cables when the mast is tilted and
erected. The spiral can be installed around the cables by hand or with
an optional tool as illustrated in Figure 97 below.
0306-057
Figure 97 Protecting Cables with Spiral
To Next Page
Loading...
