EasyManua.ls Logo

Vaisala MAWS201MP TACMET - Installing the Pedestal Tube; Figure 44 Pedestal Tube Alignment to North-South Direction; Figure 45 Pedestal Tube Attachment

Vaisala MAWS201MP TACMET
153 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 3 ______________________________________________________ Installation of the Mast
VAISALA _______________________________________________________________________ 61
Installing the Pedestal Tube
1. Turn the pedestal tube so that the plate lug faces south in the
northern hemisphere and north in the southern hemisphere, see
Figure 44 below. The plate lug is for attaching the guide for the
winch wire.
0303-028
Figure 44 Pedestal Tube Alignment to North-South
Direction
2. First place the washers and then the spring washers onto the
previously installed nuts and lift the pedestal tube through the
bolts onto the washers.
3. Install the nuts with the washers and spring washers to the
foundation bolts. Refer to Figure 45 below.
0303-029
Figure 45 Pedestal Tube Attachment

Table of Contents

Related product manuals