Installation Manual _________________________________________________________________
24 __________________________________________________________________ M210485EN-B
installed and the measurement continues. Meanwhile the other probe
head can be calibrated.
The probe is installed in a naturally aspirated shield made of injection
molded UV stabilized plastic. The shield has a multiplate design
providing the necessary shielding from solar radiation and
precipitation.
Pressure Sensor PMT16A
Figure 10 Pressure Sensor PMT16A
The silicon capacitive pressure sensor PMT16A has excellent
accuracy, repeatability, and long-term stability over a wide range of
operating temperatures. It maintains its accuracy and calibration for
long periods of time, thus reducing the need for field calibrations.
The fine adjustment and calibration of the sensor at the factory are
handled according to the electronic working standards, which are
based on international standards.
To Next Page
Loading...
