Chapter 4 _________________________ Installation of the Weather Station Components to the Mast
VAISALA _______________________________________________________________________ 91
0306-038
Figure 75 Installing the Mounting Piece to the Logger
Tube
2. Mount the logger tube inside the radiation shield. Guide the
mounting piece for the sensor arm (number 1 in Figure 76
below) through the opening (2) in the radiation shield.
3. Secure the installation with the bolt (3) using the Allen key (4).
Install the other provided bolt to the lower hole.
0306-039
Figure 76 Mounting the Logger Tube
Mounting the QMP202MP Unit
The power supply and connection unit is mounted under the radiation
shield beside the logger tube. Refer to number 2 in Figure 74 on page
89 for the location of the mounting holes. Secure the power supply
unit with four bolts and washers as illustrated in Figure 77 on page 92.
To Next Page
Loading...
