Chapter 4 _________________________ Installation of the Weather Station Components to the Mast
VAISALA _______________________________________________________________________ 95
CAUTION
Save the container and all the packaging materials. Always ship the
Vaisala Ultrasonic Wind Sensor in its custom shipping container.
Otherwise, you will void the warranty.
0211-099
Figure 80 Installing Ultrasonic Wind Sensor
5. Remove the bolt (2) from the sensor body (1). Use the correct
size Allen key or appropriate screw driver.
6. Connect the cable (6) to the sensor (1).
7. Attach the sensor adapter (3) to the sensor body (1). Insert and
tighten the bolt (2) using the correct size Allen key or
appropriate screw driver.
8. Reattach the mounting clamp (8) around the sensor adapter (3),
but do not tighten the bolt (4) yet.
9. Tilt or lower the mast, if not already tilted.
To Next Page
Loading...
