Installation Manual _________________________________________________________________
48 __________________________________________________________________ M210485EN-B
carefully. Also the power supply for the equipment used needs to be
planned carefully.
It is recommended to use a conduit to protect the cables that connect
the indoor components to the outdoor components from damage and
moisture. Note also, that traffic, standing water, and the twist and
stress caused by the connectors can damage the cables.
Required Tools
For installing the mast, you need a set of Allen keys, two adjustable
wrenches, a water level, and a big hammer.
For details on the tools that are needed in the installation procedure of
the weather station components, refer to section Preparing Installation
on page 87.
Unpacking Instructions for the Mast
Inspection of the Delivery
Check the shipping boxes for possible damage. Check that there are
no loose parts or connectors before installing the mechanics of the
equipment and cabling them. If there has been any damage, contact
Vaisala immediately.
Also refer to the unpacking instructions of the weather station
components in section Unpacking Instructions on page 87.
Contents of the Delivery
The mast and the accessories are packed into cartons. The contents of
the cartons may vary depending on the selected options. Check the
delivery contents against the packing list provided in a plastic folder
on or inside the carton. Refer to Figure 34 on page 49 and Figure 35
on page 50 to identify the items.
To Next Page
Loading...
