Installation Manual _________________________________________________________________
128 _________________________________________________________________ M210485EN-B
Table 9 below explains the Configuration Wizard Buttons.
Table 9 Explanation of Configuration Wizard Buttons
Button Explanation
Radio Modem Opens Radio Modem Configuration program
Dial-up Opens optional Dial-Up Manager
Silence MAWS/
Enable MAWS
Silences MAWS
Asks which radio channel to use and then
enables MAWS
Sensor Terminal Opens Sensor Terminal application
M4 Services Opens MIDAS IV Service Manager
M4 Diagnostics Opens ROA Diagnostics Monitor
Start M4 Starts MIDAS IV applications
Stop M4 Stops MIDAS IV applications
Apply Accepts configuration changes
Cancel Cancels configuration changes
Locations... Opens METAR/SPECI Manager application
System Parameters Tab
From the System Parameters tab (see Figure 110 on page 127), you
can configure the parameters described in Table 10 below and Table
11 on page 129.
Table 10 Explanation of System Parameters Tab: General
Frame
Item Description
Configuration Select your system configuration: 1 Basic
station, 1 Enhancement station, Basic and
Basic stations, Enhancement and Basic
stations, Enhancement and Enhancement
stations, or Fixed Station.
Units Select the units you want to use: SI or US.
Station identifier The unique ICAO identifier with 4 characters
when the METAR message is sent to AFTN.
Otherwise, give the station ID, for example,
airfield name.
Runway direction Give the Runway direction in degrees.
Magnetic correction Give the difference between magnetic north and
true north.
To Next Page
Loading...
