Options Give us your thoughts:
Ver-Mac 2016 V-Touch Controller User Manual, V3.0 35
8.2 Brightness
Figure 22 - Testing for Brightness
In Automatic mode the controller adjusts the brightness of the light emitted by the
LEDs according to information from the photocells and displays the current reading.
In Manual mode you move the slider to select the level of brightness you want. The
output reading changes according to your selected level.
Select Automatic or Manual and check the readings.
To return to Options screen, tap Options;
or
To access other functions, tap any Operation button.
It is suggested to leave the PCMS brightness on automatic to avoid creating a
dangerous situation at night. The brightness required for daytime operations will
dazzle a nighttime motorist and reduce the autonomy of the unit.
To Next Page
Loading...
