Parameters Give us your thoughts:
Ver-Mac 2016 V-Touch Controller User Manual, V3.0 50
9 Parameters
The Parameters screen gives you access to certain settings and invisible aspects of the
PCMS which can affect the state of the sign itself and its operations.
Figure 39 - Parameters screen
If you do not see the Parameters button on the left of Home screen, tap the
Toggle button to display the other Operations.
Guest Users can access Parameters to change their password or to change the language of
the user interface. Admin Users have full access to all the functions on the Parameters
screen.
What You See
Guest Management allows Admin Users to control access to the
operating functions of the Touchscreen Controller.
Change Password is where users can set a personalized password.
Network gives access to the communications settings for the system.
Special Code allows Ver-Mac Support to assist clients in adding new
features.
Clock allows you to configure the system clock.
Diagnostic is an aid to debugging problems that cannot be resolved
otherwise.
To Next Page
Loading...
Need help?
General
