Parameters Give us your thoughts:
Ver-Mac 2016 V-Touch Controller User Manual, V3.0 53
3. Enter the changes and confirm.
4. Apply the changes to the network settings.
5. Select any Operations button to access other functions.
9.4 Special Code
This option is only available for Admin Users. Upon instructions from Ver-Mac Support
you:
Tap Special Code and use the keypad to enter the coded information.
9.5 System Clock
This option is only available for Admin Users. In order to counter clock time-drift, Ver-
Mac recommends the use of an NTP server. The Touchscreen Controller offers you
the option of configuring the system Clock Manually or as an NTP client.
Figure 43 - Clock Configuration – Manual
1. Select the time zone that matches the geographic location of the PCMS.
2. Adjust the present Date and Time (arrows or keypad input) and Apply.
If you use an NTP server:
Select and Apply the Time Zone for the PCMS.
Tap NTP Client to open NTP Client Config. window.
To Next Page
Loading...
Need help?
General
