Options Give us your thoughts:
Ver-Mac 2016 V-Touch Controller User Manual, V3.0 43
8.10 Countdown Timer
Figure 30 - Countdown window
This option is only available to admin users. This function allows you to set the font for
the numbers in your countdown display and the duration of the countdown (in
seconds).
In the spin box, type or select the Font and Time.
Tap the relevant button (Start, Pause, Play) to further control your Countdown.
Tap Reset to return the countdown to the initial setting.
8.11 Data Management
Data Management allows Guest and Admin users to create a customized data set from
a VMS or from JamLogic 2. They can then deploy this data rapidly to other VMS by
means of a USB key.
You must format the USB key with the FAT or FAT32 file system. Otherwise the
system is unable to detect it.
1. Open the Controller cabinet and swing back the front panel.
2. Locate the USB port on the back of the Touchscreen Controller. It is the one
closest to the face of the Touchscreen.
3. Insert your USB key into the port.
4. From the Options menu, tap Data Management.
5. When the system has located a valid USB storage device, tap the relevant
button for what you want to do.
Figure 31 - USB Data Connector
To Next Page
Loading...
Need help?
General
