Figure 5.14 Resize or Remove a Panel
Edit UNIT STATUS Panel with the Edit Icon
The UNIT STATUS panel may be changed to add or remove data. The panel has four default parameters. Any or all can be
deleted or replaced with the Editing icon.
Possible parameters for the UNIT STATUS panel are:
• Input
• Bypass
• Battery
• Load
NOTE: Changes made to the UNIT STATUS panel will be applied to all views using the panel.
To edit the UNIT STATUS panel:
1. Touch and hold the Edit icon on the UNIT STATUS panel, to activate the editing mode.
2. Touch the large X by a parameter icon to delete it or touch the + icon at the bottom right of the
panel to add a parameter icon.
3. Touch the header area to deactivate the edit mode.
5 Operator Control and Display
Panel
Proprietary and Confidential ©2023 Vertiv Group Corp. 67
Vertiv™ Liebert® APM2 30 to 120 kVA Modular UPS User Manual
To Next Page
Loading...
