Vertiv™ NetSure™ Control Unit (NCU) User Manual
Individual Battery Settings Page
In the Battery Device Group Status Page Tab, click the settings wheel icon to go to the individual battery settings page. See
Figure 5.28. Click to go back to the Battery Device Group Status Page Tab. The actual display of an Individual Battery
status is dependent on the NCU configuration and if SMDU or EIB shunts are programmed as battery shunts (see Figure 5.29, Figure
5.30, and Figure 5.31.
Note that FIAMM SoNick (Sodium Nickel) Battery parameters cannot be changed.
Figure 5.28 Selecting an Individual Battery Settings Page
To Next Page
Loading...
