Vertiv NetSure M830B User Manual

Vertiv™ NetSure™ Control Unit (NCU) User Manual
181
SNMP Tab
Configures SNMP V2 and V3 parameters.
Accepted Trap Level Parameter Description
• Accepted Trap Level: Sets SNMP V2 and V3 trap level.
Adding an Entry
1. Enter the parameters in the parameter fields.
2. Click the "Add" button to add the entry.
NOTE! To reset the form (i.e. to start over) and erase all information entered, click on the “Reset” button.
Modifying an Existing Entry
1. Select the Entry to be modified from those listed at the top of the screen.
2. Modify the parameters.
3. Click the "Modify" button to modify the parameters for this Entry.
NOTE! To reset the form (i.e. to start over) and erase all information entered, click on the “Reset” button.
Deleting an Entry
1. Select the Entry to be deleted from those listed at the top of the screen.
2. Click the "Delete" button to delete this Entry.

Vertiv NetSure M830B Specifications

General

Brand	Vertiv
Model	NetSure M830B
Category	Controller
Language	English