Vertiv NetSure M830B User Manual

Vertiv™ NetSure™ Control Unit (NCU) User Manual
75
Table 2.3
Alarm Name Alarm Description Action to Correct
Battery Temp Summary Alarm
Battery temperature alarm summary (one or more
alarms designated as battery temperature is active).
“Manufacturer Use” Only.
SMDUE1 Temp1 High 2
Temperature sensor #1 (connected to SM-DUE1 and
set as Battery) sensing temperature higher than high
temperature threshold 2.
Check why temperature is high or low. SMDUE1 Temp1 High 1
Temperature sensor #1 (connected to SM-DUE1 and
set as Battery) sensing temperature higher than high
temperature threshold 1.
SMDUE1 Temp1 Low
Temperature sensor #1 (connected to SM-DUE1 and
set as Battery) sensing temperature lower than low
temperature threshold.
… … …
SMDUE1 Temp10 High 2
Temperature sensor #10 (connected to SM-DUE1 and
set as Battery) sensing temperature higher than high
temperature threshold 2.
Check why temperature is high or low. SMDUE1 Temp10 High 1
Temperature sensor #10 (connected to SM-DUE1 and
set as Battery) sensing temperature higher than high
temperature threshold 1.
SMDUE1 Temp10 Low
Temperature sensor #10 (connected to SM-DUE1 and
set as Battery) sensing temperature lower than low
temperature threshold.
… … …
SMDUE8 Temp1 High 2
Temperature sensor #1 (connected to SM-DUE8 and
set as Battery) sensing temperature higher than high
temperature threshold 2.
Check why temperature is high or low. SMDUE8 Temp1 High 1
Temperature sensor #1 (connected to SM-DUE8 and
set as Battery) sensing temperature higher than high
temperature threshold 1.
SMDUE8 Temp1 Low
Temperature sensor #1 (connected to SM-DUE8 and
set as Battery) sensing temperature lower than low
temperature threshold.
… … …
SMDUE8 Temp10 High 2
Temperature sensor #10 (connected to SM-DUE8 and
set as Battery) sensing temperature higher than high
temperature threshold 2.
Check why temperature is high or low. SMDUE8 Temp10 High 1
Temperature sensor #10 (connected to SM-DUE8 and
set as Battery) sensing temperature higher than high
temperature threshold 1.
SMDUE8 Temp10 Low
Temperature sensor #10 (connected to SM-DUE8 and
set as Battery) sensing temperature lower than low
temperature threshold.
BTRM Temp Delta
Activates for the condition selected in the “BTRM Temp
Delta Alarm” parameter. Refer to “Battery Tab
Programmable Parameter Descriptions” on page 146 for
details.
--
Battery 1 Alarms
Battery Current Limit Exceeded Battery current limit point is exceeded. --
Battery Over Current Battery is in over current. --
Low Battery Capacity Battery has low capacity. Check the batteries.
Battery Current High 1 Curr Current above High 1 limit.
Check why current is high.
Battery Current High 2 Curr Current above High 2 limit.

Vertiv NetSure M830B Specifications

General

Brand	Vertiv
Model	NetSure M830B
Category	Controller
Language	English