Chapter 16 Maintenance and Troubleshooting
Maintenance procedure
User Manual 79000000203 Rev. 005 169
Never use any product containing acetone, trichlorethylene, benzine or
alcohol, as these will attack the printed markings.
Cleaning the screen
To clean the screen, use an antistatic product.
Cleaning the optical cable connector
• Use a non-fluffy type of paper, such as Joseph paper, soaked in
isopropylic alcohol.
• Pay particular attention to the polished face of the fiber, rubbing it in a
direction perpendicular to the axis of the fiber.
Cleaning the optical connections of the 2000
Platform
• Squirt a highly volatile solvent (such as isopropylic alcohol) into the
connector.
• Blow out the connector using a clean dry air supply from an aerosol
can fitted with an extension.
Accessing to the 2000 Platform information
On the 2000 Platform, some screens allows to display information on
different elements of the equipment.
To display the information on the 2000 Platform
NOTE
If your module has a universal connector, unscrew its adap-
tor to access the ferule.
To Next Page
Loading...
