Chapter 16 Maintenance and Troubleshooting
Maintenance procedure
User Manual 79000000203 Rev. 005 179
Checking new upgrade on Viavi Server
If the Viavi Server is selected for upgrade (see Figure 91 on page 174), the
parameter Check new release can be defined to automatically inform user
of a new upgrade available for Platform.
1 In the System Settings screen, select Upgrade parameters
2 Check the Address Type is set to Viavi Server.
3 Define the parameter Check new release to Enable.
If the parameter is set to Enable, a message displays, at any time,
when one update is available on server.
4 Press Ok to display the list of software versions available (see
Figure 92 on page 175) and follow instructions “Launching the
upgrade” on page 178.
During the upgrade, the Testing indicator is lit in red.
Do not push any button or remove the USB memory
stick while the indicator is lit. The USB stick can be
removed if necessary once the Testing indicator is off.
Figure 94 Checking new release
To Next Page
Loading...
