Chapter 3 Starting up
Charging the battery
User Manual 79000000203 Rev. 005 17
Charging the battery
Connecting the mains adapter
1 Set the appropriate adaptable plug to the power supply cable,
according to your country (see page 16).
2 At the right side of the 2000 Platform, lift up the power supply socket
protector and plug in the mains adapter.
3 Connect the adapter to the mains.
The On indicator lamp starts to blink in green.
First use of the battery
At the delivery, the battery is already set into the Platform, but its charge
level is not «recognized» by the equipment.
If the adapter plug is not correctly set onto the mains
adapter, the connector may be damaged.
NOTE
The AC/DC adapter/chargers from the 4000 platform (refer-
enced E40PWxx) can also be used to connect the 2000
Platform to mains
Use only the mains adapter supplied with the 2000
Platform. The adapter for some other electronic device
may appear to be identical, but entails a risk of damage
to the 2000 Platform.
To Next Page