Chapter 5 Power meter, VFL (Visual Fault Locator) & Talkset
Talkset and Datalink Functions
42 User Manual 79000000203 Rev. 005
Talkset configuration
The talkset configuration is set in the System Settings screen, in the
Channel box (see "Defining the Audio parameters of the 2000 Platform"
page 28)
Connections
At each end of the fiber:
1 Connect the fiber to the Talkset port of the 2000 Platform, either
directly or through jumpers.
n
NOTE
It is possible to use the talkset of the 2000 Platform and to
carry out measurements at the same time, on a different
fiber.
NOTE
It is possible to use the Data transfer feature while using
the optical telephone of the 2000 Platform. Nevertheless,
the data transfer speed will be slightly decreased.
NOTE
The Talkset option is delivered with a FC adapter mounted
on standard on the talkset connector.
In addition to the FC adapter, a SC adapter is also deliv-
ered with the Talkset option.
To Next Page
Loading...
