Chapter 6 Scope
Installation of tips
User Manual 79000000203 Rev. 005 49
Installation of tips
The Pass/Fail analysis function on the 2000 Platform can only be used with
certain inspection tips mounted on the P5000i.
Seven tips, patchcords and bulkheads types, are delivered with the Video-
scope Kit (EDFSCOPE5KI) but many others can be used.
Configuring the P5000i Scope
Scope connection
1 Plug in your Viavi scope into a USB port from the 2000 Platform.
2 Push the button Home
3 Validate the Scope function .
4 Connect probe with the fiber being inspected.
You may select this option while other options are already selected (e.g.
OTDR).
Configuring the Scope
1 Press SETUP key to configure the test.
The following screen displays:
To Next Page
Loading...
