virtual access GW1000M Series User Manual

15: Configuring DHCP server and DNS (Dnsmasq)
_______________________________________________________________________________________________________
_____________________________________________________________________________________________________
© Virtual Access 2017
GW1000 Series User Manual
Issue: 1.9 Page 117 of 350
15.2.3 Dnsmasq: TFTP settings
Figure 64: The TFTP settings section
Web Field/UCI/Package Option
Description
Web: Enable TFTP Server
UCI: dhcp.@dnsmasq[0].enable_tftp
Opt: enable_tftp
Enables the TFTP server.
0
Disabled.
1
Enabled.
Web: Enable TFTP Server
UCI: dhcp.@dnsmasq[0].tftp_root
Opt: tftp_root
Defines root directory for file served by TFTP.
Web: Enable TFTP Server
UCI: dhcp.@dnsmasq[0].dhcp_boot
Opt: dhcp_boot
Defines the filename of the boot image advertised to clients. This
specifies BOOTP options, in most cases just the file name.
Table 35: Information table for TFTP settings

virtual access GW1000M Series Specifications

General

Brand	virtual access
Model	GW1000M Series
Category	Network Router
Language	English