virtual access GW1000M Series - Page 151

21: Configuring a WiFi connection
_______________________________________________________________________________________________________
_____________________________________________________________________________________________________
© Virtual Access 2017
GW1000 Series User Manual
Issue: 1.9 Page 151 of 350
networks (if the radio hardware is multi-SSID capable). There are two sections within
the Device Configuration section.
Section
Description
General Setup
Channel and transmit power settings.
Advanced Settings
HT mode, country code, distance optimization, fragmentation threshold and
RTS/CTS threshold.
21.2.1.1 Device configuration: general setup
Figure 82: The device configuration general setup section
Web Field/UCI/Package Option
Description
Web: Wireless network
UCI: wireless.radio0.disabled
Opt: disanabled
Enable or disables a wireless
1
Disables Wifi interface.
0
Enables Wifi interface.
Web: Channel
UCI: wireless.radio0.channel
Opt: channel
Select the channel you require.
Range
1-11
11 (2.462GHz)
Web: Transmit power
UCI: wireless.radio0.txpower
Opt: txpower
Select the transmit power range range you require.
Range
0dBm(1mW)-17dBm(50mW)
17dBM(50mW)
Table 49: Information table for the device configuration section