virtual access GW1000M Series - Page 152

21: Configuring a WiFi connection
_______________________________________________________________________________________________________
_____________________________________________________________________________________________________
© Virtual Access 2017
GW1000 Series User Manual
Issue: 1.9 Page 152 of 350
21.2.1.2 Device configuration: advanced settings
Figure 83: The device configuration advanced settings section
Web Field/UCI/Package Option
Description
Web: Mode
UCI: wireless. radio0.hwmode
Opt: hwmode
Mode options.
Option
Description
Auto
Wireless protocl negotiate with
supplicat device.
802.11b
Select the wireless protocol to use
802.11g
Select the wireless protocol to use
802.11a
Select the wireless protocol to use
802.11g+n
Select the wireless protocol to use
802.11a+n
Select the wireless protocol to use
Web: HT mode
UCI: wireless.radio0.htmode
Opt: country
HT mode options.
20MHz
specifies the channel width in 802.11
40MHz 2nd
channel below
specifies the channel width in 802.11
40MHz 2nd
channel above
specifies the channel width in 802.11
Web: Country Code
UCI: wireless.radio0.country
Opt: country
Sets the country code. Use ISO/1EC 3166 alpha2 country codes.
Web: Distance Optimization
UCI: wireless.radio0.distance
Opt: distance
Defines the distance between the AP and the furthest client in
meters
15
15 meters
Range
Web: Fragmentation Threshold
UCI: wireless.radio0.frag
Opt: frag
Defines the fragmentation threshold
None
Routers defults applied
Range
Web: RTS/CTS Threshold
UCI: wireless.radio0.rts
Opt: rts
Defines the RTS/CTS threshold
None
Router defaults applied
Range
Table 50: Information table for device configuration advanced settings