21: Configuring a WiFi connection
_______________________________________________________________________________________________________
_____________________________________________________________________________________________________
© Virtual Access 2017
GW1000 Series User Manual
Issue: 1.9 Page 153 of 350
21.2.2 Wireless network: interface configuration
The interface configuration section is used to configure the network and security
settings. It has three sub sections.
Identification, network and mode settings.
Encryption, cipher and key security settings
MAC address filter settings.
21.2.2.1 Interface configuration: general setup
Use this section to configure the interface name, mode and network settings. Differing
web options may be presented depending on the Mode selected.
Figure 84: The interface configuration general setup section
To Next Page
Loading...