BA 901/1101 en – Edition 2.1 * 91101b410.fm 4-1
Malfunctions
4 Malfunctions
The information given in this chapter is provided for maintenance personnel, for fast and
reliable detection of malfunctions and their appropriate repair.
Repairs must only be performed by authorized personnel.
4.1 Engine malfunctions
Problem Possible causes See
Engine does not start or is not easy to start
Wrong SAE grade of engine lubrication oil 5-35
Fuel grade does not comply with specifications 5-35
Malfunctioning or empty battery 5-27
Loose or oxidized cable connections in starter circuit
Malfunctioning starter, or pinion does not engage
Wrong valve clearance
Malfunctioning fuel injector
Dirty fuel filter
Engine starts, but does not run smoothly or faultless
Fuel grade does not comply with specifications 5-35
Wrong valve clearance
Injection line leaks
Malfunctioning fuel injector
Dirty fuel filter
Engine overheats. Temperature warning system
responds
Oil level too low 5-5
Oil level too high 5-5
Dirty air filter 5-10
Dirty oil radiator fins 5-15
Malfunctioning fan, torn or loose V-belts 5-12
Resistance in cooling system too high, flow capacity too low
Malfunctioning fuel injector
Insufficient engine output
Oil level too high 5-5
Fuel grade does not comply with specifications 5-35
Dirty air filter 5-10
Malfunctioning air filter maintenance switch or gage 3-7
Wrong valve clearance
Injection line leaks
Malfunctioning fuel injector
Dirty fuel filter
Engine does not run on all cylinders
Injection line leaks
Malfunctioning fuel injector
To Next Page
Loading...
Need help?
General
