BA 901/1101 en – Edition 2.1 * 91101b330.fm 3-25
Operation
3.10 Starting machine travel
Machine travel will not start unless the safety bar is lowered.
After starting the engine:
☞ The alternator charge indicator light goes out
☞ Release the parking brake
☞ Slowly actuate the drive lever
➥ Machine moves off
Reversing
When working in danger zones or in conditions of poor visibility, ask someone
to coordinate attachment operation and the position changes of the machine.
Ensure that no one is near the machine or its line of travel. Seal off the working
range if necessary. Before starting machine travel, use the horn to warn other
persons within the working range – there may be persons the operator cannot
see in the blind spot behind the machine. Before reversing, ensure that no one
is in this area.
To Next Page
Loading...
Need help?
General
