BA 901/1101 en – Edition 2.1 * 91101b110.fm 1-5
Introduction
1.4 Fields of application, attachments
The attachments will decide in the first place how the loader is used.
In order to avoid damage to the machine, only the attachments listed below
have been certified for installation on the machine.
☞ Please contact your Neuson dealer if you wish to use other attachments.
Using tools of other manufacturers, or tools which have been released for other loader
types, can reduce the machine’s output and stability considerably, and can also cause
damage to the machine and injuries to the operator or the personnel.
The buckets listed below have been released by Neuson and are certified for transport on
public roads. However, the national provisions of the country shall apply in which the
machine is used.
Attachments which have been subsequently released for your machine may possibly not
be certified for transport on public roads. This requires a separate certification from the
competent authority.
Always compare the weight of the attachment and its maximum payload with the indica-
tions in the lift capacity table. Never exceed the maximum payload.
To Next Page
Loading...
Need help?
General
