BA 901/1101 en – Edition 2.1 * 91101b540.fm 5-37
Maintenance plan (overview)
5.20 Maintenance plan (overview)
Work description
For service and maintenance on the attachment, please refer to the operation and maintenance
manual of the attachment manufacturer as well.
Maintenance plan/operating hours (o/h)
Maintenance
(once a day)
Every 50 o/h
Every 250 o/h
Every 500 o/h
Every 1000 o/h
once a year
Every 1500 o/h
Every 3000 o/h
or 5 years max.
Customer
Wacker Neuson
service center
Fluid and filter changes ( ):
Perform the following oil and filter changes (check oil levels after test run):
• First engine oil
1
change after 50 o/h, then every 500 o/h ●● ●
• First engine oil filter
2
change after 50 o/h, then every 500 o/h ●● ●
• First fuel filter
3
change after 50 o/h, then every 500 o/h ●● ●
• Fuel prefilter (from serial number DC01288) ●●
• Air filter element as indicated by indicator light ●
• Coolant (or replace every 2 years) ●●
• Water separator ●●
• First hydraulic oil filter insert
4
change after 50 o/h, then every 500 o/h ●● ●
• Hydraulic oil ●●
• Hydraulic oil reservoir breather ●●
• First gearbox oil
5
change after 250 o/h, then every 1000 o/h ●● ●
• Track case oil (first replacement after 500 o/h, then every 1000 o/h) ●●
Inspection work ( ):
Check the following material. Refill if necessary:
• Engine oil ●●
• Engine coolant ●●
• Hydraulic oil ●●
• Gearbox oil
6
●●
Clean water ducts
7
●●
Check engine/hydraulic oil radiator and air conditioning for dirt. Clean if necessary
●●
Check cooling systems, heating and hoses for leaks and damage (visual check)
●●
Replace the cabin filter for heating or air conditioning (air conditioning system option)
●●
Air filter (damage)
●●
Fuel filter with water separator: drain water
●●
Check V-belt condition and tension (retighten if necessary or replace every 2 years)
●●
Replace toothed belt
●●
Check the exhaust system for damage and condition
●●
Maintenance plan (overview)
To Next Page
Loading...
Need help?
General
