3-42 BA 901/1101 en – Edition 2.1 * 91101b330.fm
Operation
Safety bars
Lower the safety bar immediately before starting the machine. Incorrect use of,
or a malfunctioning safety bar –
Accident and death hazard!
☞ Lower the safety bars before starting the machine
☞ Immediately have a malfunctioning safety bar replaced by an authorized
Wacker Neuson service center
The seat belt serves as a restraint system, and not the safety bar! If you do not
fasten your seat belt –
Accident and death hazard!
☞ Always use the seat belt as a restraint system
• All travel and operation functions are disabled with safety bar 7/14 raised
☞ To disable the functions and after parking the machine, raise safety bars 7/14
• All travel and operation functions are enabled with safety bar 7/14 lowered
☞ To enable the functions and before starting the machine, lower safety bars 7/14
Fig. 85: Safety bars
7
7
14
14
To Next Page
Loading...
