5-32 BA 901/1101 en – Edition 2.1 * 91101b530.fm
Maintenance
Rear window
A dirty or foggy rear window offers limited visibility to the rear –
Accident hazard!
☞ Clean the rear window if it is dirty or foggy
Threaded fittings and attachments
All threaded fittings must be checked regularly for tightness, even if they are not listed in
the maintenance schedules.
☞ Engine fastening screws
☞ Fastening screws on the hydraulic system
☞ Line and pin fastenings on the attachment
Retighten loose connections immediately. Contact a Wacker Neuson service center if
necessary.
Pivots and hinges
Lubricate all mechanical pivots on the machine (such as hinges and joints) and fittings at
regular intervals even if they are not
listed in the lubrication plan.
Maintenance of attachments
Correct maintenance and service is absolutely necessary for smooth and
continuous operation, and for an increased service life of the attachments. Please
observe the lubrication and maintenance instructions in the Operator’s Manuals of
the attachments
To Next Page
Loading...
