Wacker Neuson 901SP

BA 901/1101 en – Edition 2.1 * 91101b330.fm 3-35
Operation
H controls (option):
Notice!
After having pressed button A or B, the turn indicators are active until button C is
pressed.
Hazard warning system (option)
The switch for the hazard warning system is only installed in the version certified for road
traffic (option).
Fig. 72: Turn indicator switch (H controls)
5
B
A
C
Button Left/right turn indicators
A
☞ Press push button A on control
lever 5 on the left
➥ Indicator light 33 on the round
display element illuminates
B
☞ Press push button B on control
lever 5 on the left
➥ Indicator light 33 on the round
display element illuminates
C (option)
☞ Push button C ➥ Turn indicator no longer flashes
Fig. 73: Switch for hazard warning system
51
Hazard warning system
ON
☞ Press switch 51 down ➥ Indicator light 33 on the round display
element illuminates
OFF
☞ Press switch 51 up ➥ Indicator light 33 on the round display
element goes out