3-22 BA 901/1101 en – Edition 2.1 * 91101b330.fm
Operation
3.9 Machine travel on public roads
The machine is subject to the:
• Applicable legal regulations of your country
Also observe the applicable regulations for accident prevention of your country.
Preparing machine travel on public roads
Only machines with road traffic certification (option) may be used on public roads.
Get informed on and follow the legal regulations of your country.
Perform the following activities before performing machine travel on public roads:
☞ Check the steering system
☞ Check the light system and the turn indicators
☞ Adjust the rearview mirrors
☞ Tilt out the bucket
☞ Tilt in the bucket
If no front-edge protection has been not installed for the blade –
Accident hazard!
☞ Cover the cutting blade of the bucket across the entire width with the front-
edge protection
☞ Use a suitable means of transport to move or transport buckets/
attachments which have not been authorized for transport on public roads
☞ Install the bucket cylinder lock to avoid unintentional lowering of the bucket
Install the front-edge protection:
☞ Install front-edge protection A on cutting blade B
☞ Depending on bucket version, hitch spring C of the front-edge protection onto the
bucket and insert the other end of the spring into hole D
➥ The front-edge protection is kept in place on the cutting blade B by means of spring C
Fig. 55: Front-edge protection
C
A
B
Operation
To Next Page
Loading...
