Wacker Neuson 901SP User Manual

3-34 BA 901/1101 en – Edition 2.1 * 91101b330.fm
Operation
3.15 Light system
Lights (option)
The switch panel for the light system is located on the instrument panel.
Notice!
The rear lights are only installed in the version certified for road traffic (option).
The front lights are only installed if the machine is equipped with the road traffic
option.
Turn indicators (option)
ISO controls:
The turn indicator switch is only installed in the version certified for road traffic (option).
Fig. 70: Light system switches
50
Switch Lights
ON
☞ Press switch 50 to the 1st
position
☞ Press switch 50 to the 2nd
position
➥ Indicator light in switch 50 illuminates
OFF
☞ Press switch 50 up ➥ Indicator light in switch 50 goes out
Fig. 71: Turn indicator switch (ISO controls)
52
Switch Left/right turn indicators
Left
☞ Press switch 52 to the left ➥ Indicator light 33 on the round
display element illuminates
Right
☞ Press switch 52 to the right ➥ Indicator light 33 on the round
display element illuminates
Center
☞ Move switch 52 to the center
position
➥ Indicator light 33 on the round
display element goes out

Wacker Neuson 901SP Specifications

General

Brand	Wacker Neuson
Model	901SP
Category	Compact Loader
Language	English