BA 901/1101 en – Edition 2.1 * 91101b330.fm 3-53
Operation
• Remove the starting key
• Leave the cabin, close the engine cover
• Tying down the machine
The manufacturer’s warranty shall not apply to accidents or damage caused by
loading or transporting.
Tying down the machine
The machine must be loaded and transported properly –
Accident hazard!
☞ It is essential that you read the safety instructions at the beginning of this
chapter and follow any other safety instructions relevant in your country!
• Ensure that the authorized maximum height is not exceeded!
• Secure the wheels/tracks of the loader at the front, rear and at the sides.
• Lower the loader unit and the attachment!
• Firmly tie down the loader at the eye hooks B onto the platform, with belts or chains
of adequate size!
• Before transporting the machine through heavy rain:
close the outlet of the exhaust silencer with a simple cap or suitable adhesive tape.
• Ensure that the driver of the transport vehicle knows the overall height, width and weight of
his vehicle (including the loader) before starting machine travel, and the legal transport
regulations of the country or countries in which transport will take place!
Fig. 101: Tying down the machine
C
B
B
To Next Page
Loading...
Need help?
General
