Maintenance
Up/Down System
Maintenance 60HDdoc102619 5-11
5
Periodically check the belt for wear. Replace any damaged or worn belts as needed.
2. When oil leaks from the gear reducer please contact Customer Service.
3. Inspect the up/down motor brushes every 750 hours of operation. Remove brush dust and replace
the brushes if they worn to a length of 5/8” or shorter.
CAUTION! Do not operate the up/down system if the motor brushes
are worn shorter than 5/8”. Damage to the up/down motor may result.
FIG. 5-4
Mounting
Bolts
Adjustment
Bolts
Adjustment
Bolts
Mounting
Bolts
To Next Page
Loading...
Need help?
General
