Xerox 6204 - Naming;Renaming Stored Programming

5 Stored Programming
98
Stored Programming
5
2 Select [Copy] or [Scan].
3 The current selections are displayed, and can
be changed if necessary.
4 Press the <Start> button.
Note • To cancel the registration, press the <Stop> button.
Naming/Renaming Stored Programming
This is the procedure for naming and renaming Stored Programming.
Up to 20 characters are allowed in a Stored Programming name.
1 Select the number to name/rename, and select
[Change/Delete].
Note • Select [ ] to display the previous screen and
select [ ] to display the next screen.
2 Select [Name].
3 Enter the name, and select [Save].
For information about how to enter characters, refer to
"Entering Text" (P.24).
4 Select [Close].